Skip to main content
Journal of Experimental Orthopaedics
Fig. 3 | Journal of Experimental Orthopaedics

Fig. 3

From: Biomechanical testing of fixed and adjustable femoral cortical suspension devices for ACL reconstruction under high loads and extended cyclic loading

Fig. 3

Testing was performed on a simple, custom-built rig, fixed to an Instron machine (Instron, Illinois Tool Works Inc., Norwood, Massachusetts, USA). The rig comprised a bottom-mount attached to the baseplate, a top-mount attached to the crosshead and 5 kN load cell, and a 4.5 mm horizontal steel rod held between two holes in the top-mount

Back to article page